FREE SHIPPING ON ORDERS $100 OR MORE; International Shipping Now Available

Camouflage Cornhole Board Vinyl Wrap Kit Patriotic American Flag

Camouflage cornhole board vinyl wrap kit to cover your cornhole board in your favorite Mossy Oak pattern! This cornhole board wrap kit comes with (2) pieces of 24.5" x 48.5" vinyl, with the hole pre-cut. This peel and stick cornhole board camo vinyl wrap installs easily, trims to a perfect fit, and removes easily.
$59.99
Availability: In stock
SKU
14001-CH-USA

Camouflage Cornhole Board Vinyl Wrap

Have a cornhole board you'd like to spruce up? Our Mossy Oak camouflage cornhole board wrap kit comes pre-cut to fit most cornhole boards, including the pre-cut hole. This kit comes with two (2) pieces of peel and stick vinyl, each sized to 24.5" x 48.5" which is just slightly oversized to allow for easier installation. After application, you can trim the edges and hole for a perfect fit. Cover your cornhole board with your favorite Mossy Oak pattern, or the American Flag.

 

Our vinyl wraps for cornhole boards are printed and manufactured in the United States, using state-of-the-art print technology to produce high definition camouflage patterns and and cornhole board graphics. 

 

This camouflage cornhole board wrap makes the perfect accessory to any cornhole board, and will remove easily when you're done with it. With this cornhole board wrap kit, you'll be ready for Tailgating season or wherever else you want to bring out the cornhole boards. Cover that cornhole board in camo with this peel and stick vinyl wrap pre-cut for cornhole boards.

Upload Images
Your name *
Your Email *
Choose Image *
No image chosen

Add more image

Installation is easy. Watch the video below to see how easy it is to install the Cornhole Board Texas State Flag Wrap yourself.
Prior to application, be sure the surface temperature of your cornhole board is between 60 and 80 degrees Fahrenheit. This will assist in prolonging the adhesion of the camouflage vinyl wrap to your cornhole board.

How To Install Cornhole Board Wraps:
1) Clean your cornhole board in with isopropyl alcohol or a mild soap and water solution.
2) Dry your cornhole board with a lint-free towel, making sure to remove any excess moisture or dirt.
3) With the backing still on, line up the camouflage vinyl cornhole board wrap properly on your board, making sure the pre-cut hole is lined up with the hole in your board.
4) Beginning at the top of your board, peel the backing off of the vinyl. As you lay the adhesive vinyl onto your cornhole board, use the squeegee or a credit card to press the vinyl down from the center of the board out towards the edges. Firmly press out any air bubbles.
5) Peel the backing off the camouflage wrap as you work your way down your cornhole board, continuing to use the squeegee to press down from the center of the board out to the edges.
6) Our camouflage cornhole board wrap kit is made of peel and stick vinyl, so if you need to peel the wrap back up to make any corrections, do it! You can pull the material back up, reposition, and reapply.
7) Once the material is completely covering your cornhole board, press the material down firmly. Grab your exacto knife (or equivalent) and trim any excess material from the sides and hole.
8) Give the edges of the vinyl a final, firm press down to seal those edges.

Our camouflage cornhole board wrap is made of removable peel and stick material, so when you're ready to remove the camouflage from your cornhole board just grab a corner and slowly peel it off.

Vinyl cornhole board wrap kit comes as a set of 2 camouflage vinyl wraps, each measuring 24.5" x 48.5" with the hole pre-cut. Use  a small blade to trim any excess vinyl after application.